GLOW Peptide Blend for Sale (GLOW 70)
Three repair peptides, one 70mg vial.
$104.99 30% off
GLOW 70 is a three-peptide blend in a single 70mg vial: 50mg GHK-Cu, 10mg BPC-157 and 10mg TB-500. It brings together the compounds most studied for collagen synthesis, blood supply into repairing tissue, and cell migration, so a research protocol covering all three mechanisms takes one reconstitution instead of three.
Buy GLOW peptide online from Healio. GLOW Peptide Blend for sale comes as a 70mg vial, supplied as a research blend for laboratory use only and shipped from the USA with the batch certificate of analysis published before you order. You can order GLOW peptide straight from this page.
What is GLOW peptide blend?
GLOW peptide blend, sold here as GLOW 70, is a three-peptide research blend supplied as a single 70mg vial: 50mg GHK-Cu, 10mg BPC-157 and 10mg TB-500. One vial, one reconstitution, three compounds that the tissue repair literature has studied independently for decades.
The name is simply the arithmetic. Seventy milligrams total, weighted heavily toward the copper peptide, which is the component with the deepest published record behind it.
What is in the GLOW peptide blend
| Compound | Amount | Mechanism studied |
|---|---|---|
| GHK-Cu | 50 mg | Collagen and elastin synthesis, extracellular matrix remodelling |
| BPC-157 | 10 mg | Angiogenesis and connective tissue repair signalling |
| TB-500 | 10 mg | Actin polymerisation and cell migration |
Why these three are blended together
Each compound approaches tissue repair from a different mechanism. GHK-Cu acts as a signalling molecule influencing gene expression around remodelling, and carries copper as a required cofactor for lysyl oxidase, the enzyme that crosslinks collagen and elastin. BPC-157 is studied principally for angiogenesis, the formation of new blood supply into repairing tissue. TB-500 works on actin, the structural protein that governs how cells migrate into a site that needs rebuilding.
Structure, blood supply, and the cells that do the work. That is the logic, and it is a reasonable one.
What it is not is a demonstrated combination. Published studies of these three compounds administered together do not exist. The blend is mechanistically coherent rather than clinically proven, and saying so plainly is more useful than implying a synergy nobody has tested.
GLOW peptide research applications
Research interest in this combination sits across skin structure and collagen work, wound and connective tissue repair models, and healthy-ageing studies where extracellular matrix quality is the endpoint. GHK-Cu alone accounts for the bulk of that literature, running back to the 1970s and originating in wound healing research rather than cosmetics.
Supplied as a laboratory research material only.
GLOW 70 versus buying the three vials separately
The practical difference is reconstitution. Three separate vials means three diluent volumes, three concentrations to track and three sets of handling. A blend fixes the ratio at the point of manufacture, which removes that arithmetic but also removes the ability to vary one component independently.
If a protocol needs to adjust GHK-Cu without touching the others, buy the vials separately. If the ratio above is the ratio you want, the blend is fewer steps and a lower combined cost.
GLOW Peptide Blend reconstitution and handling
Supplied lyophilized. Reconstitute with bacteriostatic water, adding diluent slowly against the vial wall and allowing the powder to dissolve without agitation. Never shake, as peptides degrade under shear force.
Because the blend is a fixed ratio, the reconstitution volume you choose sets the concentration of all three components at once. The GLOW Peptide Blend calculator turns vial strength and water volume into a concentration.
GLOW Peptide Blend storage and stability
Store the sealed lyophilized vial at minus 20 degrees Celsius, protected from light. Copper complexes are light-sensitive, so light protection matters more for this blend than for most single peptides. Reconstituted solution requires refrigeration at 2 to 8 degrees Celsius and a shorter usable window. Do not freeze the reconstituted solution.
GLOW peptide vs KLOW peptide: what separates the two blends
The two blends are close relatives. GLOW peptide carries three compounds, GHK-Cu, BPC-157 and TB-500. KLOW peptide carries those same three plus 10mg of KPV, a tripeptide studied mainly for inflammatory signalling. That single addition is the whole difference between them, and it is the reason KLOW sits at 80mg total where GLOW sits at 70mg.
Researchers working on skin structure and collagen endpoints tend to reach for the GLOW peptide blend, because GHK-Cu carries the bulk of that literature and the extra KPV adds a mechanism they are not measuring. Work that involves an inflammatory component is where the KLOW blend earns its extra compound. Neither combination has been studied as a combination, which is worth repeating as often as it takes.
GLOW vs KLOW: what the extra peptide actually changes is the longer comparison.
GLOW Peptide Blend price
GLOW Peptide Blend 70mg is $104.99 per vial, which works out to $1.50 per mg. Ordering more than one vial lowers the price of every vial in the order. The table shows the GLOW peptide price per vial and per mg for every size. That GLOW peptide cost is the price per vial before shipping. For the best price per vial on GLOW peptide, order three or more.
| Size | Vials in order | Price per vial | Price per mg |
|---|---|---|---|
| GLOW Peptide Blend 70mg | 1 vial | $104.99 | $1.50 |
| 2 vials 5% off | $99.74 | $1.42 | |
| 3 or more vials 10% off | $94.49 | $1.35 |
Prices are in US dollars. The multi-vial discount is applied automatically in the cart. Shipping is free on orders over $185.
Where to buy GLOW Peptide Blend in the US
If you are comparing a GLOW peptide vendor, start with the paperwork. The best place to buy GLOW peptide is one where GLOW peptide comes with a lab report you can read before you pay. Five checks separate a reliable US source from a reseller, and this is how Healio meets each one.
- A certificate of analysis for the exact batch. The GLOW peptide report for batch HEALIO-GLOW70-2617 is published before you order, not emailed after you have paid.
- Testing by a lab that is not the seller. The report comes from Quantum Life Sciences in Portland, Maine, an independent laboratory, and carries its own certificate number.
- Identity as well as purity. HPLC measures how pure each compound in the blend is. Mass spectrometry (ESI-MS) confirms each one is what the label says. A report with only one of the two is half a report.
- A lot number you can trace. The lot number on your vial ties to its own report, so you can check the document against the product in your hands.
- US dispatch and plain terms. Orders ship from the United States, and the shipping and returns policy is public before you buy.
For a longer look at judging any supplier, read the best peptide companies.
GLOW Peptide Blend lab results
The current GLOW Peptide Blend batch was tested on 23 June 2026 by Quantum Life Sciences. The certificate covers the 70 mg vial. Purity is measured by HPLC and identity is confirmed by mass spectrometry. The summary below is taken from the certificate of analysis. Reading the GLOW peptide COA takes a minute: purity by HPLC, identity by mass spectrometry and endotoxins are in the first rows.
| Batch | HEALIO-GLOW70-2617 |
|---|---|
| Lot number | GLOW70-260626-17 |
| Composition | GHK-Cu + BPC-157 + TB-500 |
| Purity (HPLC) | 99.3% (specification 98.0% or higher) |
| Identity (ESI-MS) | Confirmed for each component |
| Mass found | 70.38 mg (labeled 70 mg) |
| Endotoxins (LAL) | Under 0.5 EU/mg (limit 5 EU/mg) |
GLOW Peptide Blend reviews: is Healio a legit GLOW peptide source?
Searching for GLOW peptide reviews, or asking whether Healio is a legit GLOW peptide source? The useful evidence is what you can check yourself, because reviews only help if you can check them.
- Match the lot number on your vial to the GLOW peptide certificate of analysis.
- Look up the testing laboratory named on the certificate and confirm it is not Healio.
- Read how the content on this site is written and checked on the editorial standards page.
- If a seller will not publish a batch report for the product you are buying, treat that as your answer.
GLOW Peptide Blend payment and shipping
Orders ship from the United States to US addresses. Weekday orders placed before 2:00 PM ET usually go out the same business day, and later orders go the next business day. Transit is usually 2 to 10 business days, which is a carrier estimate and not a guarantee. Pay by credit or debit card at checkout.
| Shipping option | Price |
|---|---|
| Standard Shipping (Ground) | $14.99 (free over $185) |
| 2-Day Air | $23.99 |
| Next Day Air | $54.99 |
All sales are final. Read the full shipping and returns policy before you order.
GLOW Peptide Blend research tools and guides
- GLOW Peptide Blend calculatorTurn vial strength and water volume into concentration and syringe units. Arithmetic only.
- GLOW Peptide Blend certificate of analysisThe full lab report for the current batch.
- GLOW 70 peptide blendWhat is in the vial and why.
- GLOW vs KLOWThe two blends differ by exactly one compound.
- KLOW peptide blend for saleGLOW with KPV added.
- GHK-Cu for saleThe largest component of the blend.
- BPC-157 for saleOne of the three compounds in the blend.
- TB-500 for saleOne of the three compounds in the blend.
- GHK-Cu vs GLOWThe copper peptide against the blend built on it.
- GLOW vs Wolverine stackThe blend against the BPC-157 and TB-500 pair.
- BPC-157 vs GLOWOne compound against the blend that holds it.
- GLOW vs NAD+A three-peptide blend against a coenzyme.
Research focus
- Skin, collagen and elastin research
- Wound and connective tissue repair models
- Extracellular matrix remodelling studies
- One vial instead of three reconstitutions
Who it’s for
For researchers focused on
| Scientific name | GHK-Cu + BPC-157 + TB-500 |
|---|---|
| CAS number | Blend, see components |
| Molecular formula | Multi-component |
| Molecular weight | Multi-component |
| Sequence | GHK-Cu 50mg + BPC-157 10mg + TB-500 10mg |
| Purity | 99%+ per component (HPLC) |
| Form | Lyophilized powder |
| Appearance | Blue to blue-green powder |
Store the lyophilized powder at -20°C, protected from light. Brief exposure to room temperature during shipping does not affect stability.
After reconstitution, keep refrigerated at 2 to 8°C and use within the research window. Do not freeze the reconstituted solution.
For laboratory research use only. Reconstitute with bacteriostatic water and handle with appropriate protective equipment.
Working out the water volume? Use the GLOW 70 calculator.
-
EssentialBest Seller
Bacteriostatic Water 10ml
Sterile Reconstitution Water
$9.99SizeAdd to Cart10 mL -
Brain Health
Pinealon
Focus + Mental Performance
$49.99SizeAdd to Cart10mg -
WeightBest Seller
Semaglutide
Appetite + Weight Support
From $79.99This product has multiple variants. The options may be chosen on the product pageSizeAdd to Cart -
LibidoBest Seller
PT-141
Libido + Intimacy Support
$34.99SizeAdd to Cart10mg
GLOW Peptide Blend FAQ
Where can I buy GLOW peptide in the US?
Healio sells GLOW peptide direct from the United States, with the batch certificate of analysis published before you order. It is supplied for laboratory research use only.
How much does GLOW peptide cost?
A 70mg vial of GLOW Peptide Blend is $104.99, about $1.50 per mg. Ordering two vials brings each to $99.74 and three or more brings each to $94.49. Shipping is free on orders over $185.
Is Healio GLOW peptide third-party tested?
Yes. Each batch is tested by an independent US laboratory for purity by HPLC and for identity by mass spectrometry. The current batch measured 99.3% purity with identity confirmed, and the full report is on the GLOW peptide COA page.
How fast does GLOW peptide ship?
Weekday orders placed before 2:00 PM ET usually ship the same business day. Standard ground is $14.99 and free over $185, 2-Day Air is $23.99 and Next Day Air is $54.99. Delivery times are carrier estimates and are not guaranteed.
What payment methods does Healio accept?
Credit and debit cards, paid at checkout.
How do I reconstitute GLOW peptide?
Lyophilized GLOW peptide is reconstituted with bacteriostatic water. The GLOW peptide calculator converts vial strength and water volume into concentration and syringe units. It is arithmetic only and does not recommend an amount.
Is GLOW peptide for human use?
No. Healio supplies GLOW peptide strictly for laboratory research. It is not for human or veterinary use, and it is not a drug, supplement, food or cosmetic.
What is in the GLOW 70 blend?
50mg GHK-Cu, 10mg BPC-157 and 10mg TB-500 in a single 70mg vial, supplied as a lyophilized powder.
What is the difference between GLOW 70 and KLOW 80?
KLOW 80 is the same three peptides with 10mg of KPV added, bringing the total to 80mg. KPV is an anti-inflammatory tripeptide fragment of alpha-MSH, so the difference is an inflammation signalling component the three-peptide version does not have.
Why is the GLOW 70 powder blue?
GHK-Cu is a copper-bound complex and is visibly blue at meaningful concentrations. At 50mg of the 70mg total it dominates the colour. A colourless product sold as a GHK-Cu blend is worth a second look.
Is the GLOW 70 combination supported by research?
The three compounds individually have substantial published literature. The combination as a single formulation does not have dedicated studies behind it. The pairing is based on complementary mechanisms rather than trial data.
